Skip to content
Phone: 800.454.0049


Your Idea

Mistakes to Avoid When Deciding a 3D Printing Service Near Me

Mistakes to Avoid When Deciding a 3D Printing Service Near Me

If you are searching 3D Printing Service Near Meyou must avoid common mistakes we are providing in this post. Many people think it is an easy task to make prototypes. However, sometimes in this process, many errors and mistakes can occur. So, it is necessary to know the mistakes so it will help you in avoiding the same. The below are the mistakes people often commit after searching 3D Printing Service Near Me.

Lack of material knowledge

The first thing is you must know what are the right materials to print 3D designs. The available materials are plenty, including ceramic, resin, nylon, ABS, etc. Different materials will have different qualities such as flexibility, solidity, stiffness, brittleness, etc. Hence as per the requirement, you need to choose the correct material for optimum results.

Faulty printing  technology usage

Depending on the materials you use, 3D printing technologies will differ. For example, printing materials such as Polyamide, Alumide, and ABS are impossible to print together. Hence, several printing technologies are needed to make them print together. Hence, you must know the right printing technology to use according to the materials you are using. If you search 3D Printing Service Near Methe professional company will help you in guiding you in this direction.

Unable to identify the right file resolution

The most used file format is Standard Triangle Language or STL in 3D printing. So, while giving an STL file, it is vital to select the right resolution file. The incorrect resolution will result in bad-quality prints. If the file resolutions are low, it means you are using too big triangles. It will cause uneven prints. If the resolutions are too high, it will become challenging to upload the files. The recommendation is to choose the tolerance of 0.01m to get good prints.

Improper STL files

Improper STL files

Many times dealing with STL files becomes challenging since it represents the outer surface of your 3D model. This creates faces, edges, mesh points and defines the internal volume of your model. Along with incorrect STL resolution, errors in these files can create issues such as bad intersecting faces, boundary edges, over-refined mesh, etc. To solve this type of problem, you can use exclusive 3D software.

Incorrect wall thickness

The wall thickness is described as the distance between the machine and its opposite surface. Your model should contain minimum wall thickness every time. Improper wall thickness can cause the issues such as not being able to print and break or crack the products. The factors that influence the suggested wall thickness are alignment, size, and overall design. The proper alignment and wall thickness are crucial in 3D modeling.

Faulty setup of the machine.

In many cases, the common mistake is the improper setup of 3D printers. Often issues such as out of filament, not working nozzles, etc. Hence it is crucial to set up the machine properly before using them. Some of the advanced machines are pre-calibrated, but for others, it needs adjusting to the right setting. So, you must read the instruction properly provided in the user manual before setting the machine.